NAOqi Audio - Overview | API | Tutorial
Namespace : AL
#include <alproxies/altexttospeechproxy.h>
As any module, this module inherits methods from ALModule API. It also has the following specific methods:
Deprecated methods
Deprecated since version 2.0: This method cannot be used anymore. Notifications are now always enabled as they are required.
Disables notifications publishing in ALMemory during the synthesis (disabled by default). Please refer to ALTextToSpeechProxy::enableNotifications() for further informations.
Deprecated since version 2.0: This method cannot be used anymore. Notifications are now always enabled as they are required.
Enables notifications publishing in ALMemory during the synthesis (disabled by default). Once enabled, the following notifications are generated:
Returns the list of the languages currently installed on the system.
Example: [‘French’, ‘Chinese’, ‘English’, ‘German’, ‘Italian’, ‘Japanese’, ‘Korean’, ‘Portuguese’, ‘Spanish’]
| Returns: | List of installed languages (language names are given in English) |
|---|
altexttospeech_getavailablelanguages.py
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_getavailablelanguages.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
lang = tts.getAvailableLanguages();
print "Available languages: " + str(lang)
Returns the list of the voices currently installed on the system. Each voice is given in English.
| Returns: | Voices Installed |
|---|
Returns the language currently used by the text to speech engine.
Example: ‘French’
Could be one of the available languages.
For further details, see: ALTextToSpeechProxy::getAvailableLanguages().
| Returns: | Current language used by the text to speech engine |
|---|
Returns the value of one of the text to speech engine parameters. The available parameters are: “pitchShift”, “doubleVoice”,”doubleVoiceLevel” and “doubleVoiceTimeShift”. Please refers to ALTextToSpeechProxy::setParameter() for details about this parameters.
| Parameters: |
|
|---|---|
| Returns: | Value of the specified parameter |
Returns the list of all supported languages.
Example: [‘French’, ‘Chinese’, ‘English’, ‘German’, ‘Italian’, ‘Japanese’, ‘Korean’, ‘Portuguese’, ‘Spanish’]
| Returns: | List of supported languages (language names are given in English) |
|---|
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_getsupportedlanguages.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
lang = tts.getSupportedLanguages();
print "Supported languages: " + str(lang)
Returns the voice currently used by the text to speech engine.
| Returns: | Name of the current voice |
|---|
Gets the current gain applied to the signal synthesized by the text to speech engine. The default value is 1.0.
| Returns: | Volume [0 - 1] |
|---|
Loads a voice and the related set of voice parameters defined in a XML file contained in the preferences folder. The name of the XML file must be of the form ALTextToSpeech_Voice_preferencesFileSuffix. The official voice in each language is defined in this way. Please refers to Tutorial for further details.
| Parameters: |
|
|---|
altexttospeech_loadvoicepreference.py
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_loadvoicepreference.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
# Loads the set of voice parameters contained in the ALTextToSpeech_Voice_NaoOfficialVoiceEnglish.xml file
tts.loadVoicePreference("NaoOfficialVoiceEnglish")
tts.say("Voice preference loaded")
Returns the locale associated to the current language set on the robot. The format is xx_XX (examples: en_US, fr_FR, ja_JP, de_DE, ...)
| Returns: | The current locale associated to the current language. |
|---|
Says the specified string of characters.
Uses the language defined using ALTextToSpeechProxy::setLanguage() if any, or the default language defined in the robot’s web page.
| Parameters: |
|
|---|
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_say.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Says a test std::string
tts.say("This is a sample text!")
Says the specified string of characters in the specified language.
| Parameters: |
|
|---|
altexttospeech_altexttospeech_say2.py
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_altexttospeech_say2.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Sets the language to english
tts.setLanguage("English")
tts.say("Let me teach you some French words.")
tts.say("In French, we say")
tts.say("voiture", "French")
tts.say("for car")
Works similarly to ALTextToSpeechProxy::say() but the synthesized signal is recorded into the specified file instead of being sent to the robot’s loudspeakers. The signal is encoded with a sample rate of 22050Hz (European languages) and 16000Hz (Asian languages), format S16_LE, 1 channel.
| Parameters: |
|
|---|
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_saytofile.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Says a test std::string, and save it into a file
tts.sayToFile("This is a sample text, written in a file!", "/tmp/sample_text.raw")
#Says a test std::string, and save it into a file
tts.sayToFile("This is another sample text", "/tmp/sample_text.wav")
Deprecated since version 1.22.
due to technical improvements, there is no point to generate a file and playing it after. If you nevertheless need to do so you can use ALTextToSpeechProxy::sayToFile() and then ALAudioPlayerProxy::playFile().
Works similarly to ALTextToSpeechProxy::sayToFile() but sends also the synthesized signal to the robot’s loudspeakers.
| Parameters: |
|
|---|---|
| Returns: | Id of the task. Can be used to interrupt it. |
Sets the language currently used by the text to speech system. Each NAOqi restart will however reset that setting to the default language that can be set on the robot’s web page.
| Parameters: |
|
|---|
Sets the voice to be used by default with a specified language.
| Parameters: |
|
|---|
Sets parameters of the text to speech engine.
| Parameters: |
|
|---|
The available parameters are specific to the speech engine:
— All languages —
| Parameters | Description |
|---|---|
| pitchShift | applies a pitch shift to the voice. The value indicates the ratio between the new fundamental frequencies and the original one (examples: 2.0: an octave above, 1.5: a quint above). Acceptable range is [1.0 - 4]. 0 disables the effect. |
| doubleVoice | adds a second voice to the first one. The value indicates the ratio between the second voice fundamental frequency and the first one. Acceptable range is [1.0 - 4]. 0 disables the effect. |
| doubleVoiceLevel | sets the gain of the additional voice compared to the original one. Acceptable range is [0 - 4]. 0 disables the effect. |
| doubleVoiceTimeShift | sets the delay (seconds) between the doubled voice and the original one. Acceptable range is [0 - 0.5]. |
— Japanese only —
| Parameters | Acceptable range |
|---|---|
| volume | [0.00001 - 2.0] |
| speed | [0.5 - 4.0] |
| pitch | [0.5 - 2.0] |
| emph | [0.0 - 2.0] |
| pauseMiddle | [80.0 and 300.0] |
| pauseLong | [300.0 - 2000.0] |
| pauseSentence | [80.0 and 10000.0] |
altexttospeech_setparameter.py
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_setparameter.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Applies a pitch shifting to the voice
tts.setParameter("pitchShift", 1.5)
#Deactivates double voice
tts.setParameter("doubleVoice", 0.0)
tts.say("Pitch shift and double voice changed")
Changes the voice used by the text-to-speech engine. The voice identifier must belong to the installed voices, that can be listed using the ALTextToSpeechProxy::getAvailableVoices() method.
| Parameters: |
|
|---|
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_setvoice.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Changes the basic voice of the synthesis
tts.setVoice("Kenny22Enhanced")
tts.say("Voice changed to Kenny")
Sets the current gain applied to the signal synthesized by the text to speech engine. The default value is 1.0.
| Parameters: |
|
|---|
import sys
from naoqi import ALProxy
if (len(sys.argv) < 2):
print "Usage: 'python texttospeech_setvolume.py IP [PORT]'"
sys.exit(1)
IP = sys.argv[1]
PORT = 9559
if (len(sys.argv) > 2):
PORT = sys.argv[2]
try:
tts = ALProxy("ALTextToSpeech", IP, PORT)
except Exception,e:
print "Could not create proxy to ALTextToSpeech"
print "Error was: ",e
sys.exit(1)
#Changes the volume
tts.setVolume(0.5)
tts.say("Volume set to 50%")
This method stops the current and all the pending tasks immediately.
Deprecated since version 1.22: due to technical improvements, this method is not useful anymore. Do not use.
Indicates the occurrence of the bookmarks that are placed (using “mrk=number” number being an integer [0 - 65535]) in the string that needs to be synthesized.
For further information, see Acapela Mobility Text TAGS.
| Parameters: |
|
|---|
Indicates the sentence that is currently synthesized.
| Parameters: |
|
|---|
Indicates the word that is currently synthesized.
| Parameters: |
|
|---|
Indicates the word that is currently synthesized by its index in the current sentence. Index 0 refers to the first word of the sentence.
| Parameters: |
|
|---|
Raised when the status of a task changes.
| Parameters: |
|
|---|
Raised when the current sentence synthesis starts.
| Parameters: |
|
|---|
Raised when the current sentence synthesis is done.
| Parameters: |
|
|---|
Raised when the current sentence synthesis is interrupted, for example by ALTextToSpeechProxy::stopAll().
| Parameters: |
|
|---|